Instructions for Use

IFU - Instructions for Use

K-LOCK™ brought to you by KMD Surgical Solutions, Inc.

Unpacking K-LOCK™ Components
Installing K-LOCK™
Removing K-LOCK™
“Control Your Comfort™” Repositioning
Download IFU pdf
Blue logos for KMD Surgical Solutions, Inc. and K-LOCK™

Instructions for Use

Icon indicating Reference Catalog number
KLT1-005SD & KL1-005SD

Rx ONLY

Intended Use: The KMD K-LOCK™ is intended for surgical drain securement.
Warranty Icon
Consult electronic instructions for use
Catalog number
Icon indicating lot
Lot number  
Icon indicating Use by Date
Use by Date
Icon symbol for sterilized with radiation
Sterilized by radiation
Icon symbol meaning do not use if packaging is damaged
Do not use if package is damaged
Icon symbol indicating 'single barrier' packaging
Single sterile barrier
Icon symbol meaning do not resterilize
Do not re-sterilize
Icon symbol meaning do not reuse
Do not reuse
Icon symbol meaning Caution
Caution
Materials Provided:

• K-LOCK™ Securement Device
• K-LOCK™ Compression Retainer
• 5mm Trocar (KLT01-005SD Only)
• Alcohol Wipe
Use only with the following drain types:
‍
• 15 Fr Round Hubbed or Hubless
• 19 Fr Round Hubbed
• JP drain sizes 10 and 7
WARNINGS AND PRECAUTIONS

• Do not use if device packaging has been damaged or opened.
• Do not use after expiration date.
• Do not immobilize, tape, or restrain movement of device collar in any way.
Image of L-LOCK™ with drain and braid in retaining arm
KMD Surgical Solutions, Inc.
1959 N. Peace Haven Road
PMB #360
Winston Salem, NC 27106 www.kmdsurgical.com

Unpacking K-LOCK™ Components

KLT1-005SD with Trocar

KL1-005SD without Trocar
Image of 2 complete K-LOCK™ kits in trays, one with a trocar and one without a trocar
Image of K-LOCK™ tray closed with lid, Arrow indicates - Peel lid from corner.
1.  Remove lid.
Image of K-LOCK™ tray kit with arrow indicating - Lift K-LOCK™ and remove.
2.  Remove K-LOCK™ from tray.
Image of K-LOCK™ tray kit with arrows indicating alcohol pad and 'lift this end of Trocar.'
3.  Remove alcohol pad. Lift end of Trocar, if present.
Image of K-LOCK™ tray kit with arrows indicating Trocar and Compression Retainer
4.  Remove Compression Retainer and Trocar, if present.

Installing K-LOCK™

INSERT DRAIN PER THE USUAL METHOD.

If the drain being used does not have a trocar, for best results use the K-LOCK™ TROCAR (if supplied).
  • Place drain exit site at least 3cm from wound edge when possible.
  • For best results apply K-LOCK™ when all incisions are closed, cleaned, and final dressings are being placed.
K-LOCK™ device for surgical drain securement.
1.  Engage Compression Retainer to compress braided sleeve.

2.  Degrease skin around the drain site with provided alcohol pad, or similar.

3.  If using, place antimicrobial pad (BioPatch® or similar).

4.  Slide K-LOCK™ over the end of the drain tube to the skin surface.
Image of K-LOCK™ unit with Compression Retainer installed and adhesive pad adhered to skin. Remove paper liner
5.  Remove paper liners and gently press adhesive pad to skin.
Image of K-LOCK™ unit with arrow indicating to remove Compression Retainer
6.  Remove Compression Retainer.
Image of K-LOCK™ unit with braid extended. Arrow indicates to lift tab and rotate
7.  Lift tab to rotate holder.
Image of L-LOCK™ with drain and braid in retaining arm with arrow pointing to Device Collar. Do not immobilize, tape, or restrain movement of device collar in any way
8.  Place drain/sleeve into horizontal holder.

Removing K-LOCK™

Image of L-LOCK™ with drain and braid in retaining arm with arrow pointing to Device Collar to disengage the drain/sleeve from holder
1.   Disengage the drain/sleeve from the horizontal holder.
Image of K-LOCK™ unit with arrow indicating to gently pull up edge of spunlace pad



2.   Gently pull up the edge of the spunlace pad. Use a medical grade adhesive remover or a moisturizer as the adhesive pad is not readily dissolved by alcohol. Then, fully release the pad from the skin.
Image of K-LOCK™ unit being removed from patient with two hands. Keeping drain tube in body.
3. With the pad fully released from the skin, and while holding the drain in place, lift the K-LOCK™ device completely off the drain tubing.

4. Remove the antimicrobial pad and clean the drain exit site.

5. Replace the device, if required, using the “Installing K-LOCK™ Instructions.”

Control Your Comfort™ Repositioning

For convenience, the direction of the drain may be reoriented by the patient or a healthcare worker to a more comfortable position away from clothing or pressure points.
Image of K-LOCK™ unit with braid extended. Arrow indicates to lift tab and rotate
1.   Disengage the drain/sleeve from the horizontal holder, then lift tab to rotate holder.
Image of K-LOCK™ unit with braid extended. Double headed arrow indicates to rotate arm to desired position
2.   Rotate to the desired position and then release the tab.
Image of L-LOCK™ with drain and braid being re-engaged in horizontal retaining arm. Do not immobilize, tape, or restrain movement of device collar in any way
3.   Re-engage the drain/sleeve with the horizontal holder.
White logo for KMD Surgical Solutions, Inc.
Contact
KMD Surgical Solutions, Inc. © 2025 | US Patent No. 12,233,223